info
  · profile
  · ordering info
  · contact
  · catalog for printing
products
 • gears
  · pinions
  · axles & epoxy
  · guides and nuts
  · spacers
  · front wheels & rims
  · silver solder
  · ball bearings
  · tools
  · cans G27
  · mini setups and parts for Scale
  · single endbells
  · assembled endbells
  · endbell parts
  · G12 production motors and setups
  · G12 motors - top blueprinted
  · G12 setups - top blueprinted
  · motor and endbell parts for G12 motors
  · G12 ceramic magnets
  · parts for bodies
  · Cahoza wear
services
  · magnet zapping services

GEARS


descriptioncodepackingUSD
HIGHLY DURABLE GEARS 80 PITCH GLUED TO AXLE 3/32
gears 45T glued to axle #23, hub diameter milled down to 3,7mm (.145"), ideal for Eurosport 24
1-AGea15.00
HIGHLY DURABLE GEARS 80 PITCH
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44, 45 teeth
1-Bea6.20
POLYMER GEARS 80 PITCH ELITE 2MM AXLE
polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth
2ea4.90
HIGHLY DURABLE GEARS 80 PITCH GLUED TO AXLE 2MM
gears 44T glued to axle #24, hub diameter milled down to 3,7mm (.145"), total width of hub milled down to 3,8mm (.149"), ideal for Sport32
2-AGea17.00
HIGHLY DURABLE GEARS 80 PITCH 2MM AXLE
new highly durable polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44 teeth
2-Bea6.20
POLYMER GEARS 72 PITCH ANGLED 2°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 2°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories
3ea5.20
HIGHLY DURABLE GEARS 72 PITCH ANGLED 2°
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 42, 43 teeth, angled by 2°
3-Bea6.20
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion
4ea5.20
HIGHLY DURABLE GEARS 72 PITCH ANGLED 16°
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 41T, 42T, 43T, angled by 16°
4-Bea6.20
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24
5ea4.90
HIGHLY DURABLE GEARS 72 PITCH GLUED TO AXLE 3/32
gears 39T, 40T glued to axle #23, hub diameter milled down to 3,7mm (.145"), ideal for Eurosport 24
5-AGea15.00
HIGHLY DURABLE GEARS 72 PITCH GLUED TO AXLE 2MM
gears 38T (corrected) and 39T glued to axle 2mm, hub diameter milled down to 3,7mm (.145"), total width of hub milled down to 3,8mm (.149"), ideal for Sport 32
5-AG-2ea17.00
HIGHLY DURABLE GEARS 72 PITCH
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 39T, 40T, 41T
5-Bea6.20
HIGHLY DURABLE GEARS 72 PITCH FOR 2MM AXLE
new highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 38, 39 and 40 teeth
5-B-2ea6.20
HIGHLY DURABLE GEARS 72 PITCH
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth
5-BCea6.20
HIGHLY DURABLE GEARS 72 PITCH FOR 2MM AXLE
new highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth
5-BC-2ea6.20
POLYMER GEARS 64 PITCH ELITE
polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 35, 36, 37, 38, 39 teeth
6ea4.90
HIGHLY DURABLE GEARS 64 PITCH GLUED TO AXLE 3/32
gears 64 pitch 35T, 36T glued to axle #23, hub diameter milled down to 3,7mm (.145")
6-AGea15.00
HIGHLY DURABLE GEARS 64 PITCH
new highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 35, 36 teeth
6-Bea6.20
HIGHLY DURABLE SPECIAL GEARS 64 PITCH FOR G7 RACING
new highly durable polymer gears 64 pitch, 37T, 38T, 39T, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant
8ea6.20
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth
11ea5.20
POLYMER GEARS 64 PITCH ANGLED 15°
polymer gears 64 pitch, for 3/32" axle, angled 15°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 36 teeth
11-Sea5.20


DISCOUNT INFO
Maximum discount for distributors on gears glued on axles is 30%.


TECHNICAL INFO
Cahoza gears are produced using high quality polymer (nylon) violet materials and a new type of non-colored nylon, which is resistant against crashes. These gears are computer designed for less friction, high durability, no spinning on the hub. We use the best technology when producing these gears, we expand our assortment, our hubs are more accurate and made from better material. Gears are being made on a professional CNC machine. On every single piece size and number of teeth is stated. All hubs that Cahoza uses for gear production are being manufactured on a CNC machine with preciseness of 0,002mm. This teeth design provides high durability and accuracy. For professional wing car racing we recommend using #8. Used polymer is a material that is especially mixed along Cahoza needs and recommendations. It is a great novelty and a complete turnover in gear production. Cahoza is the biggest gear manufacturer, supplier and seller in the world. Just try these gears and you will be satisfied.


DIAMETER CHARTS
80 pitch dia (mm) dia (inch) 72 pitch dia (mm) dia (inch) 64 pitch dia (mm) dia (inch)
44T 14,50 .570 42T 2° 15,42 .607 35T 14,62 .575
45T 14,80 .582 43T 2° 15,75 .620 36T 15,02 .591
      44T 2° 16,12 .634 37T 15,42 .607
      41T 16° 15,06 .593 38T 15,80 .622
      42T 16° 15,38 .605 39T 16,22 .638
      43T 16° 15,72 .618 37T special 15,46 .608
      44T 16° 16,05 .632 38T special 15,87 .625
      38T 14,15 .557 39T special 16,26 .640
      38T corrected 14,50 .570 36T 15° 15,00 .590
      39T 14,50 .570 37T 16° 15,46 .608
      40T 14,85 .584 38T 16° 15,82 .622
      41T 15,20 .598 39T 16° 16,25 .639


back to top